Burnished slate metal roofing is a type of material that has come to the forefront in recent years. It is most often seen on homes with traditional architecture, but can be used with any architectural style.
This blog post will go over some basic information about burnished slate metal roofing and teach you how to apply it correctly.
What Is a Burnished Slate Metal Roofing?
Burnished slate metal roofing is a material that looks like traditional, handcrafted stone. It has been used for centuries and can be found on many types of buildings including homes, businesses and other commercial structures.
This type of roofing comes in different colors as well as finishes such as smooth or textured which give it a natural look.
It is important to note that burnished slate metal roofing will be heavier than traditional materials because of its density.
What are the Benefits of Applying Burnished Slate Metal Roof
There are many benefits to using this type of material on your roof.
- It is extremely durable and long lasting.
- The color of the material will not fade over time so you won’t have to worry about it looking dirty or old as easily as other types of roofing such as asphalt shingles.
- Burnished slate metal offers a natural look that can complement many different styles of architecture including traditional, southwestern and even contemporary.
- It is an eco-friendly option because it can be recycled easily when you are ready to replace your roof.
- You can rest assured that burnished slate metal roofing will withstand strong winds, heavy rain and even hail.
How to Apply a Burnished Slate Metal Roof?
Here are the steps you will need to follow when applying this type of roofing:
Step 1: Make sure your roof is properly prepared and cleaned before beginning the installation process. This will ensure that no dirt or debris gets trapped between layers of material which can cause problems later on.
Step 2: Install a starter strip at the bottom edge of each side using self tapping metal screws; these screws will be covered by the next section.
Step 3: Apply a cap sheet, which acts as an underlayment that helps prevent leaks and protect against moisture damage. This should also be attached with self tapping screws at each seam and every four feet along ridges.
Step 4: To install your shingles you need to start at the bottom and work your way up, overlapping each section by half.
Step 5: Install a drip edge along the eaves of your roof which will protect against water damage that can occur if proper drainage isn’t installed. This should be attached with self tapping metal screws as well.
If you need help applying burnished slate metal roofing to your home or other structure, contact a contractor who specializes in it.
They will be able to walk you through the whole process and help ensure that everything goes smoothly so you don’t run into any problems down the road.
What Are Some Other Tips for Applying Burnished Slate Metal Roof?
- When you are finished, clean up any excess material and debris so it doesn’t get into your garden or other areas around the house.
- If this is an extra large job such as a metal roofing installation then make sure you have help from at least one more person to ensure that you can finish the job quickly and safely.
- When you are finished applying your new roofing material, make sure to inspect it for any damage or issues that might have occurred during installation which could cause leaks later on down the line if not fixed.
- If there is an issue then you should hire a contractor to come out and fix it before it gets worse.
- Make sure that you have a permit for this type of work to avoid any fines from your local government in the future if they notice what is going on and decide it needs to be reported.
With these tips in mind you should be able to easily apply burnished slate metal roofing and enjoy all of its benefits for many years in the future.
How to Clean a Burnished Slate Metal Roof?
It’s super easy! Just use large amounts of water to clean it with.
Make sure that you have the type of water hose that is strong enough to handle this material or else it could be damaged in the process.
What are some other tips for cleaning a burnished slate metal roof?
- Use warm soapy water mixed together and applied with a sponge, soft cloth or even an old toothbrush to gently scrub away any dirt or other particles that are stuck on the surface of your roof.
- Use a soft bristle brush to remove any moss, algae or lichen growing on top before it damages the material underneath by breaking through and creating holes which will allow water in.
- If there is any moss, algae or lichen growing on top of your roof then you should clean it off as soon as possible before it damages the metal and requires more extensive repairs.
Final Thought
The benefits of burnished slate metal roofing are many, and you can find out more about them by reading this blog.
With low-maintenance requirements, a long lifespan, and the ability to withstand extreme weather conditions like hail storms or hurricanes, it’s easy to see why so many homeowners choose this type of roofing for their home.
